Rear seat 1. Before lifting the rear seat, make sure that the 1 seat belt is not stuck behind the backrest. 2. Pull the seat back up until it locks into place. 3. Install the rear middle headrest. 2 3 4 Picture: The unlocking device is located on the rear side of the outer rear headrest 5 Both parts of the rear seat backrest can be folded separately to facilitate the transportation of longer cargo. 6 Warning 7 • Do not apply a load exceeding 20kg on the folded seat backrest. • The rear seat cannot be folded while the vehicle is driving, because when the vehicle decelerates or accelerates suddenly, it may cause injury to the person folding the seat.
• When there are passengers or luggage in the rear seat, do not fold the corresponding rear seat. • Properly secure luggage to prevent it from sliding or moving, and do not place luggage higher than the seat backrest. • When the seat is in the folded position, no one is allowed to ride in the luggage area or the rear seat. Passengers who use these areas without proper protection may cause serious injury while driving or when braking suddenly. • Be careful not to damage the seat belt when folding the rear seats. • Before folding the seat back down, remove the headrest and store it safely, otherwise the headrest may be damaged.
8 9 10 11 Before folding the rear seats, it may be necessary to adjust the front seats forward to fully fold the rear seats forward. 1. Press the unlocking point to unlock it, and then tilt the backrest forward. Seat and safety 35 Warning • When the seat returns to its original position, it must be confirmed that it is securely fixed in the locked position. If it is not completely locked, it may cause injury during driving or sudden braking.