The seat belt is an important safety component. Please check the seat belt according to the following steps before each driving. If there is any abnormality, please contact the SERES Center immediately. 1 ● Check whether the seat belt is twisted or dirty. ● Check whether the seat belt is severely worn, cut, or burned. 2 ● Insert the seat belt bolt into the buckle, pull the seat belt quickly, and check the fixing of the seat belt buckle. 3 Picture: Front seat belt height adjustment ● Pull the seat belt quickly to check the lock of the seat belt retractor. 4 Press and hold the adjustment button to adjust the height of the seat belt up and down to a suitable position.
Warning It is recommended that the wounded use a seat belt, please consult your doctor for specific advice. Please strictly follow the warning information below, otherwise it may cause personal injury or death and vehicle damage. • Make sure to wear the seat belt correctly. In the event of an accident, improperly wearing the seat belt will increase the risk of injury or death. • Do not attach the seat belt to hard, fragile, or sharp objects on your clothes, such as pens, keys, glasses, etc. The pressure generated by the seat belt on these objects may cause injury. • Each seat belt can only be used by one driver and occupant in the vehicle.
• After any collision, you should go to SERES Center to inspect the seat belt assembly including the retractor and all accessories. • If the seat belt has burrs, contamination or damage, it must be replaced in time. • The user cannot modify the seat belt or add accessories, otherwise the seat belt adjustment device or the automatic retracting function of the seat belt assembly will be hindered. • When the seat belt is not in use, it should be fully retracted, and the seat belt must not be placed in a loose and overhanging state. 5 6 The front seat belts are equipped with pretensioners. In the event of a serious frontal collision, they work with the airbag.
The pretensioners automatically retract the seat belt retainer and seat belt to reduce the overlap of the seat belt. Partial and diagonal slack, thereby reducing the forward movement of the driver and occupant. 7 Even if the pretensioners and airbags are not activated during a collision, it does not mean that they are malfunctioning. It usually means that the strength or type of collision did not activate them. Warning 8 Once the seat belt pretensioner is activated, it must be replaced. After an accident, the airbag, seat belt pretensioner, and other related components must be submitted for inspection and replaced if necessary.
9 You can wipe the seat belt with a sponge dipped in neutral soapy water. After wiping, place the seat belt in a cool place and dry it for use. 10 11 Seat and safety 43 Warning c The seat belt can only be cleaned on the car and annot be disassembled at will.