Braking System The braking system is composed of a brake pedal and an electronic parking brake. The brake pedal is used to decelerate, and the parking brake is used to prevent the vehicle from rolling. The vehicle is also equipped with an automatic parking function. When there is a certain slope on the road, there is no need for you to step on the brake pedal, the vehicle will automatically remain stopped, and the electronic parking brake will be automatically released when the vehicle starts to assist you in starting the vehicle smoothly.
In an emergency, fully depress the brake pedal and maintain a stable pressure, even on low-traction roads, ABS changes the brake pressure applied to each wheel according to the amount of traction available, which can prevent the wheels from locking up , And make sure that the vehicle stops as safely as possible. Warn Warn • Do not release the brake pedal immediately after stepping on it, as this will interrupt the ABS working process and increase the braking distance. • Always maintain a safe distance from the vehicle ahead and grasp the dangerous situation during driving.
Although ABS can improve the braking distance, it cannot exceed the laws of physics, nor can it prevent the dangers caused by tire skidding (especially on rainy and snowy roads). Normal operation of the brake system is essential to ensure safety. If you encounter problems with the brake pedal, brake caliper or any component of the vehicle's brake system, please contact the SERES service center. When the vehicle is started for the first time, the ABS (Anti-Lock Braking System) indicator on the meter will flash briefly. If this indicator lights up at any other time, it means that ABS has failed and ABS cannot work. Please contact SERES service center immediately.
Vehicle brake pads are equipped with wear indicators. The wear indicator is a thin metal plate connected to the brake pads. When the brake pads are worn to the limit, it will rub against the brake disc and make a sharp friction sound. If you encounter this In this case, please go to Chongqing Jinkang New Energy Service Center for maintenance.
The tires and wheels must be regularly removed for visual inspection of the brakes, regarding the detailed specifications and usage restrictions of the brake discs and brake pads Except for a brief display at the first startup, if this indicator is displayed on the meter at any other time, it indicates that the intelligent booster, brake system failure or low brake fluid level has been detected. Please contact SERES service center immediately. Warn Except for a short display at the first start-up, if this indicator is displayed on the meter at any other time, it means that the intelligent booster is detected to be faulty. Please contact the SERES service center immediately.
• Failure to replace worn brake pads will damage the brake system and may result in a dangerous braking situation. • Please check the degree of wear of the brake discs and brake pads every time the vehicle is maintained, and replace them if necessary according to the recommendations of the maintenance personnel.