Picture indication: shift knob Depress the brake pedal to stop the car steadily. When the car is at a standstill, press the P gear button to switch the gear to the P gear to achieve parking. The parking brake is only applied to the rear wheels and is independent of the service brake system. When the parking brake is working, the indicator light on the meter will light up. If an electrical fault occurs in the parking brake, a parking brake fault message will be displayed on the meter. Picture indication ： Settings>ADAS assistance (different configuration functions are different, please refer to the actual vehicle) ● The driver is not wearing a seat belt. ● The driver's door is open.
● The accelerator pedal is not depressed. 1 EPB RELEASE ● The brake pedal is not stepped on. 1. Switch to the parking gear. ● The vehicle speed is less than 3km/h. 3. Click the button to turn the icon gray, and the parking state is released. 2. Depress the brake pedal. ● Close the main driving door. 4. The vehicle beeps and shifts to neutral (the parking brake is released). ● Depress the brake pedal. Warn ● Switch to the "non-P gear" state. When the vehicle is out of power, the parking brake cannot be released.