SI30 Solar Pump Inverter Manual 3.3 Panel button (standard configuration) It is able to complete start /stop operation on inverter by pressing [Start/Stop] key in the cover panel only when F0.02=0. Pressing the key to start it when it is in stop status. While it is in running status, press the key to stop it. And user can also press the key to reset it when it is in fault status. The “Power” indicator will be on once power on and “Run” indicator will be on when inverter is running. As fault comes, “Fault” indicator will be always on. While “Fault” indicator is blinking, alarm comes. 15