1 PREFACE 1.1 Regulation The Intergas combination boiler meets the requirements of Statutory Instrument 'The Boiler (Efficiency) Regulations'. Intergas declares that the materials used in the manufacturing of this appliance are non- hazardous and that no substances harmful to health are contained within the appliance. 1.2 Warnings Intergas accepts no responsibility for the unsatisfactory performance of the appliance or flue arising from the failure to comply with the installation and user instructions. Incorrect installation could invalidate your guarantee and may lead to prosecution.
The appliance cannot be removed from the original place of installation and transferred to another site or re-sold without prior consent from Intergas to re-register the appliance with Intergas in order to maintain the warranty. The boiler must be installed in accordance with these instructions and the regulations currently in force. Read these instructions carefully before installing or using the appliance. It is the installers responsibility that the installation conforms to the current legislation and Standard Codes of Practice. 1.3 Manual handling When moving the boiler always keep your back straight, bend your knees, don’t twist, move your feet.
Avoid bending forwards or sideways and keep the load as close to your body as possible. Where possible transport the boiler using a suitable trolley, sack truck or get some assistance. Grip the boiler firmly and before lifting establish where the weight is concentrated to determine the centre of gravity, repositioning yourself if necessary. 1.4 Warnings on the box This is a fragile piece of equipment: Please provide a dry storage for the appliance. This is a fragile piece of equipment: Please be very careful not to drop. Store the appliance in a flat position as indicated on the box. No more than three boxes should be stacked on top of each other.
1.5 Pictograms The following pictograms are used in this manual: CAUTION Procedures which – if they are not performed with the necessary caution – can result in damage to the product, the surrounding area or the environment, or in physical injury. WARNING HIGH VOLTAGE Risk of electrical shock. FROST PROTECTION Procedures which must be followed to prevent frost damage. Intergas Heating Ltd 4