Chapter 3: Installation 3.1 Controller Installation This equipment must be shipped and stored in a temperature-controlled environment. See the following table. It should be shipped and stored in the original packaging, which is designed to prevent damage from normal shock and vibration. You should protect the package from excess shock and vibration. Table 3-1. Environmental Specifications WARNING: Use an appropriate IP-rated enclosure. Before Unpacking Carefully inspect all shipping containers for evidence of damage during transit. If any damage is indicated, request that the carrier’s agent be present at the time the container is unpacked.
Upon Unpacking Compare the actual items received (not just the packing slip) with your equipment purchase order, and verify that all items are present and that the shipment is correct. Inspect each item for external damage as it is removed from its container. Contact Omron Adept Technologies, Inc. immediately if any damage is evident. Retain all containers and packaging materials. These items may be needed in the future to settle a damage claim. Perform the following steps to unpack the SmartController EX motion controller and Front Panel, optional sDIO expansion module Expansion Module, and optional pendant. Refer to the following sections for information on mounting the equipment.
SmartController EX User’s Guide, 11069-000 Rev. F Page 13 of 92 Ambient temperature 5° to 40° C (41° to 104° F) Storage and shipment temperature –25° to 60° C (-13° to 140° F) Humidity range 5 to 90%, non-condensing Altitude up to 2000 m (6500 ft) Free space around controller (for proper cool- ing) 10 mm at back, 13 mm on sides (0.4 in., 0.5 in.) Chassis protection class IP20 (NEMA Type 1)