en Rinse aid system Rinse aid system Rinse aid system Spilled rinse aid can cause ex- cessive frothing during the wash cycle. 4. Close the lid of the dispenser for Rinse aid system You can use the rinse aid system and rinse aid to get tableware and glasses rinsed perfectly without marks. rinse aid. a The lid clicks into position. Rinse aid Setting the amount of rinse aid For optimum drying results, use rinse aid. Only use rinse aid for domestic dish- washers. If there are streaks or water marks on tableware, change the amount of rinse aid. Adding rinse aid If the rinse aid refill indicator lights up, top up with rinse aid. Only use rinse aid for domestic dishwashers. 1. Press . 2.
To open the appliance settings, press for 3 seconds. a flashes in the display. 3. Press repeatedly until flashes. 4. Press repeatedly until the right amount of rinse aid has been set. 0, 1, 2 or 3 LEDs will light up ac- cordingly. The factory setting is level 2 ("LED A and LED B" → Page 15 ). – A low setting adds less rinse aid 1. Press the catch on the lid of the dispenser for rinse aid and lift . during the wash cycle and re- duces streaking on tableware. – A higher setting adds more rinse aid during the wash cycle, reduces water marks and im- proves the drying result. 5. To save the settings, press 2. Add rinse aid up to the max mark. for 3 seconds. max 3.
If rinse aid spills out, remove it from the tub. 24 2 1