Home Connect en 3. Press repeatedly until and flash in the display. 4. Press repeatedly until the LEDs show the right value. If "LED A" → Page 15 is not lit, Ex- tra Dry is switched off. If "LED A" → Page 15 is lit, Extra Dry is switched on. 5. To save the settings, press If LED A, LED B and LED C light up, the function is permanently ac- tivated. The factory setting is level 2 ("LED A and LED B" → Page 15 ). 5. To save the settings, press for 3 seconds. Restoring factory settings for 3 seconds. 1. Press . 2. To open the appliance settings, Set Wi-Fi 1. Press . 2. To open the appliance settings, press for 3 seconds. a flashes in the display. 3.
Press repeatedly until , and flash in the display. 4. Press to set the appliance back to the factory settings. a The appliance is reset. press for 3 seconds. a flashes in the display. 3. Press repeatedly until and flash in the display. 4. Press repeatedly until the LEDs show the right value. If "LED A" → Page 15 is not lit, the wireless network connection is switched off. If "LED A" → Page 15 is lit, the wireless network connection is switched on. 5. To save the settings, press Home Connect Home Connect Home Connect This appliance is network-capable. Connect your appliance to a mobile device to control its functions via the Home Connect app.
The Home Connect services are not available in every country. The avail- ability of the Home Connect function depends on the availability of Home Connect services in your coun- try. You can find information about this at: www.home-connect.com. To be able to use Home Connect, you must first set up the connection to the WLAN home network (Wi-Fi 1 ) and to the Home Connect app. Ў → "Connecting the appliance to for 3 seconds. Activating Remote Start 1. Press . 2. To open the appliance settings, press for 3 seconds. a flashes in the display. 3. Press repeatedly until flashes on the display. 4. Press repeatedly until the LEDs show the right value.
If LED A lights up, the function is permanently deactivated. If LED A and LED B light up, the function can be selected using the WLAN home network (Wi-Fi)", Page 34 The Home Connect app guides you through the entire login process. Fol- low the instructions in the Home Con- nect app to configure the settings. button. 1 Wi-Fi is a registered trademark of the Wi-Fi Alliance. 33