Bosch — Additional functions

Additional functions en Programme: Use Programme sequence Additional func- tions Tableware: Ў Cleaning mixed table- Reduced noise: Ў Pre-Rinse Ў Cleaning 50 °C Ў Intermediate rinse Ў Final rinse 63 °C Ў Dry All → "Additional functions", Page 19 Silence 50 ware and cutlery. Level of soiling: Ў Removing common household food remnants lightly dried-on. Tableware: Ў Cleaning mixed table- Time-optimised: Ў Cleaning 65 °C Ў Intermediate rinse Ў Final rinse 69 °C Ў Dry EfficientDry → "Additional functions", Page 19 Express 65° - 1h ware and cutlery. Level of soiling: Ў Removing common household food remnants lightly dried-on. Express 45° Tableware: Ў Cleaning delicate table- Time-optimised:

Ў Cleaning 45 °C Ў Intermediate rinse Ў Final rinse 55 °C EfficientDry → "Additional functions", Page 19 ware, cutlery, temperat- ure-sensitive plastics and glasses. Level of soiling: Ў Removing lightly adher- ing fresh food remnants. Use only if appliance is un- loaded. Machine Care 70 °C None Machine Care Note: The relatively long running time in the Eco 50 ° programme is due to longer soaking and drying times. This results in optimal consumption val- ues. Additional functions Additional functions Additional functions You can find an overview of the addi- tional functions that can be selected here.

Different additional functions, which can be found on the control panel of your appliance, are available depending on the appliance configur- ation. Information for test institutes Test institutes are provided with in- formation for comparability tests, e.g. according to EN60436. These are the conditions for conduct- ing the tests, however they are not the results or consumption values. E-mail enquiries to: dishwasher@test- appliances.com The product number (E-Nr.) and the production number (FD) are required here. They can be found on the rat- ing plate on the appliance door. Additional func- tion Use Ў Switch on with small Half Load loads.

Ў It is recommended adding less detergent to the detergent dis- penser than for a full machine load. 19