Detergent en Switching the rinse aid sys- tem off If you find the rinse aid refill indicator irritating, e.g. when using combined detergents with a rinse aid compon- ent, you can switch the rinse aid sys- tem off. Tip: The function of rinse aid is lim- ited with combined detergents. You will generally get better results using rinse aid. max 3. If rinse aid spills out, remove it from the tub. Spilled rinse aid can cause ex- cessive frothing during the wash cycle. 4. Close the lid of the dispenser for 1. Press . 2. To open the basic settings, press for 3 seconds. a The display shows Hxx. a The display shows . 3. Press repeatedly until the display shows the value set at the factory r05. 4.
Press repeatedly until the dis- play shows r00. 5. To save the settings, press rinse aid. a The lid clicks into position. Setting the amount of rinse aid If there are streaks or water marks on tableware, change the amount of rinse aid. for 3 seconds. a The rinse aid system is switched 1. Press . 2. To open the basic settings, press off and the rinse aid refill indicator is deactivated. for 3 seconds. a The display shows Hxx. a The display shows . 3. Press repeatedly until the display shows the value set at the factory r05. 4. Press repeatedly until the right amount of rinse aid has been set.
– A low setting adds less rinse aid Detergent Detergent Detergent Find out which detergents are suit- able for your appliance. Suitable detergents Only use detergents that are suitable for dishwashers. Both separate and combined detergents are suitable. For optimum washing and drying res- ults, use separate detergent, adding "Special salt" → Page 25 and "Rinse aid" → Page 26 separately. Modern, powerful detergents mainly use a low-alkaline formulation with enzymes. Enzymes break down starch and remove protein. Oxygen- during the wash cycle and re- duces streaking on tableware. – A higher setting adds more rinse aid during the wash cycle, reduces water marks and im- proves the drying result.
5. To save the settings, press for 3 seconds. 27