en Installation and connection Drinking water connection 3. Check that the mains plug is inser- ted properly. Connect your appliance to a drinking water connection. Installing the drinking water connection Note: If you are replacing the appli- ance, you must use a new water sup- ply hose. 1. Consult the installation instructions supplied for the steps required here. 2. Connect the appliance to the drink- ing water connection using the en- closed parts. Observe the "Technical data" → Page 57 . 3. When doing so, check that the drinking water connection is not kinked, crushed or twisted. Electrical connection Connect your appliance to the power supply.
Connecting the appliance to the electricity supply Notes Ў Follow the "Safety instructions" → Page 5 . Ў Connect the appliance to alternat- ing current only, in the range of 220 - 240 V and 50 Hz or 60 Hz. Ў Please note that the water safety system is only functional if there is a power supply. 1. Insert the non-heating appliance plug of the power cable into the appliance. 2. Insert the mains plug of the appli- ance into a nearby socket. The connection data for the appli- ance can be found on the rating plate. 14