Contents Connections Playback Settings Tips Appendix o Dynamic Comp. o Dialog Control Compress dynamic range (difference between loud and soft sounds). Auto: Automatic dynamic range compression on/off control according to source. Adjust the volume of dialog in movies, vocals in music, etc. so these can be heard more easily. Low / Medium / High: These set the compression level. 0 – 6 (Default : 0) Off: Dynamic range compression is always off. 0 This can be set when a DTS:X signal that is compatible with the Dialog Control function is input. o Low Frequency 0 “Dynamic Comp.” can be set when Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos or DTS signal is input.
0 The default setting is “Off”. When the input signal is the Dolby TrueHD or Dolby Atmos source, the default setting is “Auto”. 0 “Auto” cannot be set when inputting a DTS signal. Adjust the low frequency effects level (LFE). -10 dB – 0 dB (Default: 0 dB) 0 For proper playback of the different sources, we recommend setting to the values below. 0 Dolby Digital sources: 0 dB 0 DTS movie sources: 0 dB 0 DTS music sources: -10 dB Front panel Display Rear panel 140 Remote Index