Contents Connections Playback Settings Tips Appendix ZONE2 Setup o Volume Limit Makes settings for audio playback with ZONE2. Make a setting for maximum volume. 60 (-20 dB) / 70 (-10 dB) / 80 (0 dB) (Default : 70 (-10 dB)) 0 Values set for “Volume Limit” and “Pow.On Volume” are displayed according to the setting specified for the volume “Scale”. ( v p. 145) 0 This can be set when “Assign Mode” is set to “ZONE2”. ( v p. 175) Off: Do not set a maximum volume. o Volume Level 0 This can be set when “Volume Level” is set to “Variable”. ( v p. 195) 0 The dB value is displayed when the “Scale” setting is “ –79.5 dB – 18.0 dB”. ( v p. 145) o Pow.On Volume Set the volume output level.
Variable (Default) : Volume can be adjusted. 1 – 98 (–79 dB – 18 dB): Volume is fixed at the desired level. The volume cannot be adjusting using the remote control unit. Define the volume setting that is active when the power is turned on. Last (Default) : Use the memorized setting from the last session. Mute: Always mute when power is turned on. 1 – 98 (–79 dB – 18 dB): The volume is adjusted to the set level. 0 The dB value is displayed when the “Scale” setting is “ –79.5 dB – 18.0 dB”. ( v p. 145) 0 This can be set when “Volume Level” is set to “Variable”. ( v p. 195) 0 The dB value is displayed when the “Scale” setting is “ –79.5 dB – 18.0 dB”. ( v p.
145) Front panel Display Rear panel 195 Remote Index