Contents Connections Playback Settings Tips Appendix Desired sound does not come out The volume does not increase. 0 Appropriate volume correction processing is performed according to the input audio format and settings, so the volume may not reach the upper limit. 0 The maximum volume is set too low. Set the maximum volume using “Limit” on the menu. ( v p. 145) No sound comes out with the HDMI connection. 0 When outputting HDMI audio from the speakers, set “HDMI Audio Out” on the menu to “AVR”. To output from the TV, set “TV”. ( v p. 151) 0 Check the connection of the HDMI connectors. ( v p. 50) No sound comes out of a specific speaker.
0 When using the HDMI Control function, check that the audio output is set to the AV amplifier on the TV. ( v p. 122) 0 Check that speaker cables are properly connected. 0 Check that a selection other than “None” is set for the “Speaker Config.” setting in menu. ( v p. 175) 0 Check the “Assign Mode” setting in the menu. ( v p. 174) No sound is produced from subwoofer. 0 When the sound mode is “Stereo” and “Virtual”, audio is only output from the front speakers and subwoofer. 0 Check the subwoofer connections. 0 Set “Speaker Config.” – “Subwoofer” on the menu to “Yes”. ( v p. 176) 0 Turn on the subwoofer’s power.
0 When “Speaker Config.” - “Front” in the menu is set to “Large”, depending on the input signal and the sound mode, no sound may be output from the subwoofer. ( v p. 175) 0 When no subwoofer audio signal (LFE) is included in the input signals, no sound may be output from the subwoofer. ( v p. 183) 0 You can make the subwoofer always output sound by setting the “Subwoofer Mode” to “LFE+Main”. ( v p. 183) Front panel Display Rear panel 211 Remote Index