Contents Connections Playback Settings Tips Appendix Resetting network settings If network contents cannot be played or the unit cannot connect to the network, restarting the unit may improve the problem. We recommend restarting the unit before returning the settings to the default settings. ( v p. 207) If the operations are not improved by restarting the unit, follow the steps below. Network settings are reset to the factory default values. Make settings again. However, the menu “Amp Assign”, “Speaker Config.” and “Video” settings are not reset. 1 Press X to turn on power to the unit. 2 Turn SOURCE SELECT to select “HEOS Music”.
3 Press and hold the main unit's TUNER PRESET CH + and ZONE2 ON/OFF at the same time for at least 3 seconds. 4 Remove your fingers from the two buttons when “Network Reset...” appears on the display. 5 “Completed” is shown in the display when reset is complete. SOURCE SELECT TUNER PRESET CH + X 0 Before returning the settings to the default settings, use the “Save & Load” function from the menu to save and restore the details of various settings configured on the unit. ( v p. 202) NOTE 0 Do not turn the power off until reset is complete. Front panel Display Rear panel 225 Remote Index ZONE2 ON/OFF