Contents Connections Playback Settings Tips Appendix z 1 This item can be selected when a Dolby Digital, Dolby Digital Plus, Dolby TrueHD or Dolby Atmos signal is played. z 2 This item can be selected when a Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS:X or DTS signal is played. z 3 This item can be selected when a DTS:X signal that is compatible with the Dialog Control function is input. z 4 This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played. z 5 This setting is available when “Subwoofer Mode” in the menu is set to “LFE+Main”. ( v p. 183) z 6 This item cannot be set when “Dynamic EQ” is set to “On”. ( v p.
147) z 7 This item cannot be set when Audyssey ® Setup (Speaker Calibration) has not been performed. z 8 This item cannot be selected when a DTS:X format with a sampling frequency of over 48 kHz is input. z 9 This item cannot be set when “MultEQ ® XT” is set to “Off”. ( v p. 146) z 10 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz. Front panel Display Rear panel 237 Remote Index