Getting started Stealth SSIDs will not be displayed; in this case, enter manually in the following order. 1 To display the SSID input screen : Press [HOME] > select “Setup” and press [OK] > select “Player Settings” and press [OK] > select “Network” and press [OK] > select “Network Settings” and press [OK] > select “Wireless Settings” and press [OK] > select “Manual setting” and press [OK] 2 Enter your SSID This unit is capable of checking the firmware automatically when connected to the Internet via a broadband connection.* 3 When a new firmware version is available, the following message is displayed.
If the wireless router supports the PUSH button method* 2 ; You can connect to and configure the security settings of your wireless LAN device with ease by pressing the Link button on the router. If your wireless network is encrypted; Enter your encryption key (password). You can switch between capital and lower case letters by pressing the “Shift” key. Select “Yes” to start downloading the firmware. When the firmware update starts after the downloading is finished, a black screen is displayed. You cannot operate the unit until the update is complete. Don’t remove the AC power supply cord during the update.
Removing the AC power supply cord while the update is in progress may damage the unit. Encryption Key (Password) l Shift 1 After the firmware is installed, unit will restart and the following screen will be displayed. Space OK RETURN (QWHUFDVHVHQVLWLYH Refer to the owner’s manuals of the hub or router. Do not use this unit to connect to any wireless network for which you do not have usage rights. Using these networks may be regarded as illegal access. If you have trouble getting online on your PC after performing network settings on this unit, perform the network settings on your PC.
Please be aware that connecting to a network without encryption may result in the leaking of data such as personal or secret information. update the firmware. https://panasonic.jp/support/global/cs/ (This site is in English only.) To show the firmware version on this unit. ( > 34, “Firmware Version Information”) Downloading will require several minutes. It may take longer or may not work properly depending on the connection environment. *1 An SSID (Service Set IDentification) is a name used by wireless LAN to identify a particular network. Transmission is possible if the SSID matches for both devices.
*2 The PUSH button method is a connection method which allows you to set encryption for a wireless LAN connection with ease. You can connect to a wireless LAN network by pressing a certain button on the wireless access point [Link button, WPS (Wi-Fi Protected Setup TM ) button, etc.]. *3 You must agree to the terms of use for the Internet function and the privacy policy. ( > 33, “Legal Notices”) *4 “X.XX” represents the firmware version number. - 18 - Firmware updates Firmware Update New Version: X.XX Current Version: X.XX Do you want to start firmware update? For the update information, please visit the following website:
http://panasonic.net/support/ Yes No OK RETURN 4 2 3 4 5 6 7 8 9 0 Backspace . # “ / : ~ _ @ - , ; * ` The firmware was updated. Current Version: x.xx 4 can also download the latest firmware fro wing website and store it to a USB device m to