Getting started Getting started Accessories Unit and media care Check the supplied accessories before using this unit. Clean this unit with a soft, dry cloth Never use alcohol, paint thinner or benzine to clean this unit. Before using chemically treated cloth, carefully read the instructions that came with the cloth. 1 Remote control (N2QAYB001157) 2 Batteries for remote control 1 AC power supply cord (K2CB2YY00092) This unit’s lens Use the lens cleaner (not supplied) to clean the unit’s lens. The enclosed Canadian French label sheet corresponds to the English display on the unit. Product numbers are provided in this Owner’s Manual correct as of April 2018. These may be subject to change.
Do not use AC power supply cord with other equipment. Clean discs DO DO NOT Using the remote control Insert the batteries to the terminal so that it ( i and j ) matches those in the remote control. Wipe with a damp cloth and then wipe dry with a dry cloth. Disc handling precautions Handle discs by the edges to avoid inadvertent scratches or fingerprints on the disc. Do not attach labels or stickers to discs. Do not use disc cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent. Do not use the following discs: Discs with exposed adhesive from removed stickers or labels (rented discs, etc.). Discs that are badly warped or cracked.
Irregularly shaped discs, such as heart shapes. (Alkaline or manganese batteries) R6/LR6, AA Point it at the remote control signal sensor on this unit. ( > 9) - 5 -