Contents Connections Playback Settings Tips Appendix e r t y qw C SOURCE SELECT knob This selects the input source. ( v p. 65) D Remote control sensor This receives signals from the remote control unit. ( v p. 10) E Display This displays various pieces of information. ( v p. 21) F MASTER VOLUME knob This adjusts the volume level. ( v p. 66) G ZONE2 ON/OFF button This turns the power of ZONE2 (another room) on/off. ( v p. 140) A Power operation button ( X ) Used to turn the power of the MAIN ZONE (room where this unit is located) on/off (standby). ( v p. 65) H ZONE2 SOURCE button This selects the input source for ZONE2. ( v p.
140) I Tuner preset channel buttons (TUNER PRESET CH +, –) These select preset broadcast stations. ( v p. 82) B Power indicator This is lit as follows according to the power status: 0 Green: Power on 0 Off: Normal standby J Tuning up / Tuning down buttons (TUNE +, –) These select either FM broadcast or AM broadcast. ( v p. 79) 0 Red: 0 When “HDMI Pass Through” is set to “On” ( v p. 159) K Reception band select button (BAND) This switches the reception band. ( v p. 79) 0 When “HDMI Control” is set to “On” ( v p. 161) 0 When “Network Control” is set to “Always On” ( v p. 198) Front panel Display Rear panel 18 Remote Index u i o Q0 Q