en Installation and connection Installation and connection Installation and connec- tion installing it under a continuous work- top that is securely connected to ad- jacent cabinets. 1. "Follow the safety instructions." Installation and connection To ensure proper operation, connect the appliance to the power and water supply correctly. Observe the spe- cified criteria and the installation in- structions. → Page 4 2. "Follow the instructions for elec- trical connection." → Page 13 3. Check the Scope of supply and the condition of the appliance. 4. Consult the installation instructions Scope of supply for the installation dimensions re- quired. 5.
Make the appliance level using the After unpacking all parts, check for any damage in transit and complete- ness of the delivery. If you have any complaints, contact the dealer who sold you the appli- ance or our Customer Service. Note: The appliance has been tested at the factory to check it is in working order. It is possible that water has left marks on the appliance. These marks will disappear after the first wash cycle. The delivery consists of the following: Ў Dishwasher Ў Operating instructions Ў Installation Instructions Ў Further information documents Ў Installation material Ў Mains cable Ў Quick reference guide height-adjustable feet.
Make sure that the appliance is standing on the floor securely. 6. "Install the drainage connection." → Page 12 7. "Install the drinking water connec- tion." → Page 13 8. Connect the appliance to the power supply. Drainage connection Connect your appliance to drainage connection so dirty water is dis- charged via the wash cycle. Installing the drainage connection 1. Consult the installation instructions Installing and connecting the appliance supplied for the steps required here. 2. Connect the wastewater hose to the outlet connection of the siphon using the enclosed parts. 3.
When doing so, check that the You can position your built-under or integrable appliance in a fitted kit- chen between wooden and plastic walls. If you subsequently install your dishwasher as a free-standing appli- ance, you must stop it from tipping over, e.g. by screwing it to the wall or wastewater hose is not kinked, crushed or twisted. 4. Also check that there is no cover in the drainage system preventing the wastewater from being dis- charged. 12