English Reset Reset restarts the computer while its power is on. CAUTION: Do not press the reset switch unless an operating system runaway occurs. When the system is reset, all unsaved data is lost. Follow the steps below to reset the computer. 1. Open the switch cover. 2. Press the reset switch (shown in Illustration H ) with a pointed object such as a pen. Controlling the Speaker Volume You can control the speaker volume with the speaker volume control. 1. Open the switch cover. 2. Turn the volume control to the left to turn the volume down. Turn it to the right to turn the volume up. See Illustration I . Front Cover Lock The front cover lock locks both the front cover and the unit cover.
Locking the front cover protects the HDD and other internal parts from theft. Insert the key into the lock and turn it while slightly pushing it in to lock. Turning to the right locks and turning to the left unlocks the lock. See Illustration J . Adjusting the LCD Unit Angle You can adjust the angle of the LCD unit as you like. 1. Adjust the angle of the LCD unit while pulling the LCD lever on the right side of the LCD unit. See Illustration K . 2. Release the LCD lock lever to fix the angle. The LCD unit clicks when it is locked in place. 3. Move the LCD unit slightly up and down to ensure that the LCD unit is firmly fixed.
Adjusting the LCD Brightness You can adjust the LCD brightness by pressing the backlight brightness buttons (see Illustration L ). Press the ▼ button to darken the backlight. Press the ▲ button to brighten the backlight. The new setting is saved even if you power off the SR-610. Reading Magnetic Stripe Cards If the MSR unit is installed, you can read magnetic stripe cards. You can read the data in a magnetic stripe card by swiping the card through the MSR unit as shown in Illustration M . Hold the card, check the direction of the arrow printed on the card, and swipe it through the MSR unit. 8 SR-610 User’s Manual