MIL MIL-HDBK-683(AT) — MIL-HDBK-683(AT) Statistical Process Control (SPC) Handbook - Implementation & Evaluation PDF (EN)

Downloaded from https://www.everyspec.com tfIMiDBK-683(AT) a. If Cp is equal to or less than 1, the process setup should be rejetted. b. If Cp is equal to or greater than 1.33, the process setup should be accepted- C. If Cp is greater than 1 and less than 1.33, the process is marginal. 6.4.5.2 The Cpk ratio is the distance from the process mean to the nearest specifi~ation limit divided by three times the standard deviation. The appropriate guidelines which should be provided by the software are: a. If Cpk is greater than 1, the process is acceptable. b. If Cpk is less than 1, the process in incapable. c.

If Cpk is equal to 1, the process can be improved by centering the process, reducing the standard deviation or critically reviewing the specifi~tion limits. 6-4.6 . The ability to enter and analyze data taken during inspection or test capability studies is a highly desirable feature for any SPC software package. It is not critical that this capability be available to production personnel because the studies will normally be conducted by engineers. The software should have the capability of analyzing variables data for both the repeatability and reproducibility of the inspection or test process and operators being studied.

It should also give an overall inspection capability combining error sources using least square summation methods. Another level of utility is added if the inspection or test capability can be studied using attributes enalysis. Output data from an attrikte8 study should include the probability of misses and false alarms, as well as, computing the effectiveness and bias of the operators and procese studied. 6.4.7 ~Lf. Proper WC software will provide the engineers with the capability to format output reports in ways which convey the desired message to a variety of audiences.

If all of the features cited in this chapter are available, then data can be easily cross correlated to add cost analysis for high level managanent reviews or extraneous data oan be removed when using the information to communicate with the hourly work force. A useful feature is the ability to add several levels of titles, labels and dates to gra~ which can be called up on the screen. This capability should be available on-line and the result should be visible on screen. Embellishments which can add to the professional appearance of the outp.lt include a variety of type.sizes and fonts.

These should be consistent with the hardware available for hard COpy out~t and drives for a variety of different printers and plotters should be selectable from the printing menus. 77 ..-