No.16S058-01 4) GAMMA Sets the gamma (Default: PRESET(0.70)) The gamma setting selects from PRESET(0.70), 0.30, 0.45, 0.50, 0.60, 0.70, 0.80, 0.90 and 1.00. 5) OFFSET Sets the offset of the image. (Default: 0) 6) CONTRAST Sets the contrast of the image. (Default: 128) 7) SHARPNESS Sets the sharpness (edge enhancement) of the image. (Default: 0) a) H (Default: 4) Sets the horizontal sharpness The image becomes sharper image when increasing this setting. b) V (Default: 6) Sets the vertical sharpness. The image becomes sharper image when increasing this setting. c) CORING (Default: 3) The noise level also emphasizes when using the sharpness function.
The SN ratio deteriorate for the other than the edge parts is prevented by cutting the signal level that smaller than this setting. The image becomes the soft image if this setting sets too large. 8) MIRROR Selects the flip image setting for the video output from below two flip modes. (Default: OFF) a) OFF The standard image (No flip image) is output. b) ON The horizontal flip image is output. 10/49 STC-HD133 Series (STC-HD133DV / STC-HD133SDI) / STC-HD93 Series (STC-HD93DV / STC-HD93SDI) Users guide