No.16S058-01 2) The remote controller Please use one of below remote controller. a) The remote controller connects to 3.5mm stereo pin jack The remote controller circuit diagram The example remote controller The function for the remote controller buttons Please assign the function of push and hold operation for SW-A to SW-F. Please select button operation polarity. Below is the assignable functions for the button:
Disable Menu display DSP preset selection Contrast adjustment Shading level adjustment for shadow mask Position adjustment for shadow mask Color selection for line maker Size adjustment for line maker Position adjustment for line maker Horizontal flip Color selection for circle maker Radius adjustment for circle maker Position adjustment for circle maker Width adjustment for circle maker White balance mode selection ALC mode selection Shutter mode selection Gain mode selection EEPROM save Shadow mask enable / disable Line maker enable / disable Normal / horizontal mirror selection (push only) Circle maker enable /disable Shadow mask enable / disable (push only) Auto white balance / manual white balance selection (push only) Line maker enable / disable (push only) Tip R1 1.8K R2 3.3K R3 4.7K R4 10K R5 27K GND SW-A SW-B SW-C SW-D SW-E SW-F 1 2 1 2 1 2 1 2 1 2 1 2 SW-A SW-D SW-C SW-E SW-B SW-F 40/49 STC-HD133 Series (STC-HD133DV / STC-HD133SDI) / STC-HD93 Series (STC-HD93DV / STC-HD93SDI) Users guide