Supermicro P3TDDR Motherboard User's Manual PDF (Dual Pentium III DDR) (EN)

S UPER ® SUPER P3TDDR USER’S MANUAL Revision 1.0a

Стр. 1

The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our web site at . SUPERMICRO COMPUTER reserves the right to make changes to the product described in this manual at any time and without notice.

This product, including software, if any, and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any medium or machine without prior written consent. IN NO EVENT WILL SUPERMICRO COMPUTER BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, THE VENDOR SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product. Unless you request and receive written permission from SUPER MICRO COMPUTER, you may not copy any part of this document. Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders.

Copyright © 2002 by SUPER MICRO COMPUTER INC. All rights reserved. Printed in the United States of America

Стр. 2

Preface Preface About This Manual This manual is written for system integrators, PC technicians and knowledgeable PC users. It provides information for the installation and use of the SUPER P3TDDR motherboards. The SUPER P3TDDR supports single or dual Pentium ® III FCPGA 500 MHz-1.26 GHz+ processors, including low power Pentium III ® processors, at Front Side Bus speeds of 133, 100 and 66 MHz. Please refer to the support section of our web site (http:// www.supermicro.com/TechSupport.htm) for a complete listing of supported processors. Intel FCPGA processors are housed in a 370-pin package.

Manual Organization Chapter 1 includes a checklist of what should be included in your mainboard box, describes the features, specifications and performance of the SUPER P3TDDR mainboards and provides detailed information about the chipset. Chapter 2 begins with instructions on handling static-sensitive devices. Read this chapter when you want to install the processors, DDR-RAM memory modules for the P3TDDR, and mounting the mainboard in the chas- sis. Also refer to this chapter when you want to connect floppy/hard disk drives, the IDE interfaces, the parallel and serial ports and the wires for the power supply, the reset button, the keylock/power LED, the speaker and the keyboard.

If you encounter any problems, see Chapter 3 , which describes trouble- shooting procedures for the video, the memory and the setup configuration stored in CMOS. For quick reference, a general FAQ (Frequently Asked Questions) is provided. iii

Стр. 3

S UPER P3TDDR User’s Manual Table of Contents About This Manual ...................................................................................................... iii Manual Organization ................................................................................................... iii Chapter 1: Introduction 1-1 Overview ......................................................................................................... 1-1 Checklist .................................................................................................... 1-1 Contacting Supermicro ............................................................................

1-2 SUPER P3TDDR Image ............................................................................. 1-3 SUPER P3TDDR Layout ........................................................................... 1-4 SUPER P3TDDR Quick Reference .......................................................... 1-5 VIA Apollo Pro 266T Chipset: System Block Diagram ........................ 1-6 Motherboard Features ............................................................................ 1-7 1-2 Chipset Overview...........................................................................................

1-9 1-3 PC Health Monitoring .................................................................................... 1-10 1-4 ACPI Features ............................................................................................... 1-11 1-5 Power Supply ............................................................................................... 1-13 1-6 Super I/O......................................................................................................... 1-14 Chapter 2: Installation 2-1 Static-Sensitive Devices ...............................................................................

2-1 2-2 Processor Installation .................................................................................... 2-2 2-3 Mounting the Motherboard in the Chassis ................................................. 2-3 2-4 Installing DIMMs ............................................................................................... 2-4 2-5 I/O Port/Front Control Panel Connector Locations .................................... 2-5 2-6 Connecting Cables ......................................................................................... 2-7 Power Supply Connector .......................................................................

2-7 Infrared Connector .................................................................................. 2-7 Power Button ............................................................................................ 2-8 Reset Buttonr ........................................................................................... 2-8 Overheat LED ............................................................................................ 2-8 NIC1/2 LED ................................................................................................ 2-8 Hard Disk Drive LED .................................................................................

2-9 Power LED ................................................................................................. 2-9 ATX PS/2 Keyboard/Mouse Ports ......................................................... 2-9 Universal Serial Bus................................................................................ 2-9 Serial Ports ............................................................................................. 2-10 Wake-On-LAN ......................................................................................... 2-10 iv

Стр. 4