S UPER S ERVER 8060 Manual 3-3 Control Panel LEDs The control panel located on the front of the SC860 chassis has seven LEDs. These LEDs provide you with critical information related to different parts of the system. This section explains what each LED indicates when illuminated and any corrective action you may need to take. l PWR Fault: Indicates a power supply failure. This should be ac- companied by an audible alarm, which you can disable with the alarm switch on the control panel. Inspect the power supply units at the front left of the chassis. The unit with the red LED illuminated has failed. Refer to Section 6-5 for instructions on replacing the failed unit.
Because the power 3-2 l s o l NIC: Indicates network activity on the system when flashing. l HDD: Indicates IDE channel activity. On the SuperServer 80 light indicates CD-ROM drive activity when flashing. 60, th