Paper pick-up assembly removal Figure 4-39 Accessing the paper pick-up assembly area Prior to this step: Remove the memory card (if applicable), scanner, pods, front door, front cover, back cover, paper guide, top cover; and disconnect the laser/scanner. 1 Remove the screw attached to a bracket at the right end of the cover plate (callout 1). 2 Remove the two top screws attached to the right and left of the plate (callouts 2 and 3). 3 Remove the two screws located underneath the plate, securing it to the Paper Pick-up Assembly (callouts 4 and 5). C4224-90962 Internal assemblies 103