■ Part Names and Descriptions of the Digital Operator Selection Features 8k8k8k8k Data display RUN command LED indicator Operation keys SYSDRIVE JX Series SYSDRIVE MX Series SYSDRIVE RX Series SYSDRIVE Option Overview of Inverter Selection Advanced General-purpose Inverters SYSDRIVE RX Series 39 Name Function POWER LED indicator Lit when the power is supplied to the control circuit. ALARM LED indicator Lit when an Inverter error occurs. RUN (during RUN) LED indicator Lit when the Inverter is running. PROGRAM LED indicator Lit when the set value of each function is indicated on the data display. Blinks during warning (when the set value is incorrect). 8.8.8.8.
Data display Displays relevant data, such as frequency reference, output current, and set values. Data display LED indicator Lit according to the indication on the data display. Hz: Frequency V: Voltage A: Current kW: Power %: Ratio RUN command LED indicator Lit when the RUN command is set to the Digital Operator. (The RUN key on the Digital Operator is available for operation) RUN key Activates the Inverter. Available only when operation via the Digital Operator is selected. (Check that the RUN command LED indicator is lit.) STOP/RESET key Decelerates and stops the Inverter. Functions as a reset key if an Inverter error occurs. Mode key Switches between:
the monitor mode (d@@@), the basic function mode (F@@@), and the extended function mode (A@@@, b@@@, c@@@, H@@@). Enter key Enters the set value. (To change the set value, be sure to press the Enter key.) Increment key Changes the mode. Also, increases the set value of each function. Decrement key Changes the mode. Also, decreases the set value of each function.