4-2 Function Mode Parameter Initialization You can initialize the rewritten set values and reset to the factory default, or clear trip records. Note that this is not available for RUN and power ON times. 4 „ Initialization Method After setting the parameter, use the following method to initialize. (1) Press the STOP/RESET key with the Mode and Decrement keys pressed simulta- neously. Release the STOP/RESET key when the display blinks. Release the Mode and Decrement keys. Functions (2) Initializing 0k0 (3) Initialization completes with "d001" displayed on the monitor. dk0k0k1 The multi-function input/output terminals are also initialized with this function.
To avoid unexpected operation, be sure to re-examine the wiring. 4-38 Parameter No. Function name Data Default setting Unit b084 Initialization selection 00: Clears the trip monitor 01: Initializes data 02: Clears the trip monitor and initializes data 00 ⎯ b085 Initialization parameter selection 00: Do not change. 00 ⎯