4-2 Function Mode 4 Functions * To switch to the 2nd control, allocate 08 (SET) to the multi-function input terminal and then turn it on. Note 1: The terminal with "18" (RS) allocated will automatically have an NO contact specifications. Note 2: "19" (PTC) can only be allocated to multi-function input 5 (C005). Note 3: "64" (EMR) is set forcibly with switch S8, not with parameters. 4-44 Parameter No. Function name Data Default setting Unit C001 Multi-function input 1 selection 00: FW (forward) 01: RV (reverse) 02: CF1 (multi-step speed setting binary 1) 03: CF2 (multi-step speed setting binary 2) 04: CF3 (multi-step speed setting binary 3) 05: CF4 (multi-step speed setting binary 4) 06:
JG (jogging) 07: DB (external DC injection braking) 08: SET (2nd control) 09: 2CH (2-step acceleration/deceleration) 11: FRS (free-run stop) 12: EXT (external trip) 13: USP (USP function) 15: SFT (soft lock) 16: AT (analog input switching) 18: RS (reset) 19: PTC (thermistor input) 20: STA (3-wire start) 21: STP (3-wire stop) 22: F/R (3-wire forward/reverse) 23: PID (PID enabled/disabled) 24: PIDC (PID integral reset) 27: UP (UP/DWN function accelerated) 28: DWN (UP/DWN function decelerated) 29: UDC (UP/DWN function data clear) 31: OPE (forced operator) 50: ADD (frequency addition) 51: F-TM (forced terminal block) 52: RDY (ready function) 53: SP-SET (special 2nd function) 64:
EMR (emergency shutoff) 255: No function 00 ⎯ C201 *2nd multi-function input 1 selection C002 Multi-function input 2 selection 01 ⎯ C202 *2nd multi-function input 2 selection C003 Multi-function input 3 selection 18 ⎯ C203 *2nd multi-function input 3 selection C004 Multi-function input 4 selection 12 ⎯ C204 *2nd multi-function input 4 selection C005 Multi-function input 5 selection 02 ⎯ C205 *2nd multi-function input 5 selection C011 Multi-function input 1 operation selection 00: NO 01: NC • NO contact: "ON" with the contact closed, "OFF" with the contact open. • NC contact: "ON" with the contact open. "OFF" with the contact closed. • For the RS terminal, only NO contact is available.
00 ⎯ C012 Multi-function input 2 operation selection 00 ⎯ C013 Multi-function input 3 operation selection 00 ⎯ C014 Multi-function input 4 operation selection 00 ⎯ C015 Multi-function input 5 operation selection 00 ⎯