Sysmac Studio Software Selection Guide 202408 r2 (EN)

One Integrated Development Environment Designed to give you complete control over your automation system Combining configuration, programming and monitoring in a single interface, Sysmac Studio is a unique environment that integrates logic, motion and drives, robotics, safety, visualization, sensing and information technologies in one project. This reduces the learning curve and the intra-operative software costs. License options include the full-featured version, the controller-specific version, and a version specific to other technologies.

Minimize time to market Reduce installation costs Single Software Environment 3D Simulation • Integrating logic control, safety, motion, drives, robotics, HMI, Vision, Advances Sensing and information systems into a single environment allows programs to leverage simplified program architecture for quicker development. • Import and control CAD data to simulate a machine using standard ladder logic, structured text and function block commands. Sysmac Studio can fully simulate HMI, Controller and machine operation in one software.

• IEC611-31-3 compliance and third party compatibility further accelerates program time while allowing minimum impact to PLC Logic Simulation existing automation infrastructure. • Simulate the Ladder Logic / Structured Text programs to test the program for the actual machine. PLC Program Simulation does not require any hardware connection. Collaborate as a team • Coordinated development in large decentralized teams is possible. Sysmac Studio integrates a unique graphic interface with a GIT version control system.

Take full control of your code and variations and take advantage of the most popular version control software (GIT) and its possibilities for team collaboration, not only during the design phase but also HMI Logic Simulation • The NA HMI screens can be simulated in Sysmac Studio to help with the design of operator screens . The variables used for the PLC program can be linked with the NA HMI buttons or data displays. HMI Program Simulation does not require any hardware connection. the commissioning and operation phases.

Motion Simulation Protecting Proprietary Program Code • Sysmac Studio function blocks can be locked and customized to decrease risk of stolen intellectual property • More than 50 PLC open and Proprietary Motion FB’s available in controller to develop single, synchronous and coordinated motion applications. Rich graphic cam editor including multiple interpolation methods as standard. Motion Program Simulation does not require any hardware connection. and easy version control.

Backwards Compatible • No matter the version of Sysmac Studio, the software is compatible with all firmware versions of products in the Sysmac Troubleshooter • Sysmac Studio troubleshooter handles not only Sysmac Controller but complete Sysmac system troubleshooting in a single reporting tool. Commissioning time is dramatically reduced as any Controller, Network, or Slave problem will be detected with all suitable information available for you to control. OMRON portfolio. Extending product life in the field. Modular design • Create flexible and modular designs using Sysmac Studio library system, Intelligent Application Gadgets (HMI faceplates), and flexible EtherCAT configurations. 2

Стр. 2

License Options Boost Productivity Automatic Data Playback • The Sysmac Automation Playback is the convergence of data, video, program structure, and ladder logic. All playback is time synced and event triggered to allow local and remote team members to quickly and accurately diagnose issues without interrupting production. Information Systems • In the era of The Internet of Things, information and automation systems converge. Sysmac Studio allows you to handle OEE data by means of vertical and horizontal integration following open standards like OPC-UA, MQTT, SQL, EtherNet/IP, EtherCAT or PackML Direct. Ever Ready Security • Future updates are part of the Sysmac ethos.

Automatic software updates continuously improve software security. Combining updates with backwards compatibility firmware allows for quicker deployment of updates. 3 OMRON Product Family OMRON Product Compatiblity Sysmac Studio Basic & Advanced Sysmac Studio Lite Sysmac Studio Vision Sysmac Studio Measurement Symac Studio Drive Sysmac Studio Safety Sysmac Studio NX Logic NX1P2 • • NX102 • • NX502 • NX701 • NJ101 • • NJ301 • NJ501 • HMI NA5 • • I/O NX I/O EtherCAT Coupler • • NX I/O EtherNet/IP Coupler • • • Vision FH • • • FHV7 • • • FQM • • • Safety NX-SL3 • • • • NX-SL5/CSG • • • Motion 1S • • • G5 • • • Measurement ZW • • •

Стр. 3

Sysmac Studio Editions One Integrated Development Environment Sysmac Studio Standard Edition Compatible with all Sysmac Devices Included with Install for Standard, Basic, and Advanced Editions: • Sysmac Studio • CX-Integrator • CX-Designer • CX-Protocol • Network Configurator • CX-ConfiguratorFDT • Adept Robot IP Address Setting Tool • CX-Server • Communications Middleware Sysmac Studio Basic Edition Control of Standard Edition with Online License Management Sysmac Studio Advanced Edition Control of Basic Edition with Addition of 3D Simulation and Online License Management Expanded capabilities:

Access to Sysmac Studio License Manager, allowing users to recover licenses in the event of lost license key. Sysmac Studio Basic to Advanced Edition Upgrade from Basic to Advanced with a Single License. Sysmac Studio Lite Edition Compatible with all Sysmac Devices except NJ3, NJ5, NX7 Full Capability of Sysmac Studio Limited to NX1, NJ1 controllers. Included with Install for Lite Edition:

• Sysmac Studio • CX-Integrator • CX-Designer • CX-Protocol • Network Configurator • CX-ConfiguratorFDT • Adept Robot IP Address Setting Tool • CX-Server License required to upgrade from Lite to Standard 4 Part Number # of Users License Delivery Method SYSMAC-SE201L 1 Electronic SYSMAC-SE203L 3 Electronic SYSMAC-SE210L 10 Electronic SYSMAC-SE230L 30 Electronic SYSMAC-SE250L 50 Electronic SYSMAC-SE2XXL Site Electronic Part Number # of Users License Delivery Method SYSMAC-BA201L 1 Electronic Part Number # of Users License Delivery Method SYSMAC-AD201L 1 Electronic Part Number # of Users License Delivery Method 1 Part Number # of Users License Delivery Method SYSMAC-LE201L 1 Electronic SYSMAC-LE203L 3 Electronic SYSMAC-LE210L 10 Electronic Part Number # of Users License Delivery Method SYSMAC-LU501L 1 Electronic SYSMAC-LU503L 3 Electronic SYSMAC-LU510L 10 Electronic

Стр. 4

System Requirements The system requirements for Sysmac Studio Standard and Sysmac Studio Lite are given in the following tables 1. If you create a user program with a memory size that exceeds 20 MB, use the 64-bit edition of the operating system and 8 GB or more of RAM. 2. If the user program is large, we recommend that you use a 64-bit IBM AT or compatible with an Intel® Core™ i7 processor or better and 8 GB or more of RAM. 3. If you use the Robot Additional Option and execute Vision and Robot integrated simulations, use a 64-bit IBM AT or compatible with an Intel® Core™ i5 processor or better and 8 GB or more of RAM.

In addition, the following are also required 5 OS CPU RAM Display Windows 7 (32-bit) Windows 8 (32-bit) Windows 8.1 (32-bit) Windows 10 (32-bit or 64-bit edition) Minimum¹ IBM AT or compatible with Intel® Celeron® processor 540 (1.8 Ghz) 2 GB XGA 1,024 x 768, 16 million colors Recommended²,³ IBM AT or compatible with Intel® Core™ i5 M520 processor (2.4 GHz) or equivalent 4 GB min. WXGA 1,280 x 800x 16 million colors System Requirement Specification Available hard disk space required for installation 4.6 GB min. Communications port Ethernet or USB (USB 2.0) Recommended Video Cards The following are recommended to use 3D motion monitoring Video memory 512 MB min.

Video Card One of the following video cards: • NVIDIA GeForce 200 Series or better • ATI Radeon HD5000 Series or better

Стр. 5