7.4.3.2 Create a branch for Machine A in the local repository and push it to the remote repository (No.2: Machine A development) 1. Synchronizing the remote repository and local repository After the project is registered in the remote repository, there is a possibility that other developers are updating the target project in the remote repository. Configure the settings to synchronize the remote repository to be the master and the local repository in the Developer A’s computer. Refer to 7.3.3.2 Load the project from the remote repository (No.2: Developer A) for details.
In this scenario, this operation is unnecessary immediately after the procedure described in 7.4.3.1 Register a project in the remote repository (No.1: Machine A development) since only the Developer A accesses the remote repository. 2. Right-click the folder icon in the Multiview Explorer or on the target project in the Version Control Projects window, and select TortoiseGit - Create Branch . The “TortoiseGit” Create Branch dialog box is displayed. 3. Enter the branch name (in this example, ProductA ), and click the OK button. For Base On , select the latest revision. Select Head (master) . Sysmac Studio Project Version Control Function Startup Guide (P125) 101