General Information 01 - HOW TO USE THIS MANUAL Vehicle code of T19C • Feature Code Feature code uses 3-digit number or letter to indicate part assemblies such as engine, transmission etc. that manufactured, outsourcing manufactured and purchased by Chery. Except engines and transmissions, the code "KKK" would be used to indicate other parts and components. Feature Code Chart • Part Code Part code is made up of 7-digit, which comes from Part No. to indicate a specific part. If Part No. is less than 7-digit, "0" will be filled in. • Repair Item Repair item is made up of 2-digit and it is used to determine the repair item to be performed. Repair Item Chart:
• Repair Index It is made up of two digits showing the repair complexity, quantity of repair items, primary operations and secondary operations. The range between "00-49" represents primary operations, which can be conducted independently. The range between "50-99" represents secondary operations, which cannot be conducted independently and need to be combined with corresponding primary operations to finish the repair work. The complexity of repair item is indicated by the first digit ranging from 0 to 9, among which, based on the complexity of the repair, 0-4 for primary operations and 5-9 for secondary operations. The quantity of the item to be repaired is indicated by the second digit.
"1" indicates there is one item to be repaired for a car; "2" is two items, and so on.
As long as the items to be repaired exceed nine, the digit "9" is 01 - 3 Feature Code Component Feature Code Component E4T/F4J E4T15C/F4J16 C25/7DC CVT25/7DCT Code Description Code Description Code Description Code Description 10 Check 24 Noise Elimination 43 Turning 65 Rework 11 Measurement 26 Installation 44 Reaming 70 Sealing 12 Check & Adjustment 27 Removal & Installation 45 Grinding 73 Manufacturing 13 Adjustment 28 Removal 46 Leveling 75 Welding 14 Power Check 30 Additional Installation 47 Chambering 78 Press out 15 Power Check & Adjustment 31 Modification 48 Tapping 79 Straightening 16 Maintenance 35 Disassembly & Check 49 Chambering & Tapping 80 Balancing 17 Cleaning 36 Disassembly & Reassembly 50 Correction 90 Refinishing Fore & After Painting 20 Draining 37 Replacement 52 Pore filling 91 Polishing 21 Adding 38 Matching 55 Lubricating 92 Painting 22 Draining and Filling 40 Repair 58 Loading up 95 Paint Repair 23 Vacuum and Filling 42 Drilling 60 Screwing up 97 Word Spraying 98 Sticker