Chapter 4: Operation T20 Pendant User's Guide, 10433-000 Rev. E Page 36 of 50 Figure 4-19. Digital Input Screen After pressing the I/O soft key, perform the following steps to control I/O signals. 1. Press the Type soft key to cycle through the available signal types until the desired sig- nal type is displayed. The current signal type and the selected signal number are dis- played at the top of the screen. 2. Press the arrow buttons to select the desired signal. The selected signal is identified by a red outline. If more than one row of signals is available, press the up/down arrow buttons to scroll through the rows of signals.
If more than one screen full of signals is displayed, press PgUp/PgDn soft keys to scroll through the screens. 3. For output signals, press the Toggle soft key to turn the selected signal ON or OFF.