Setting parameters EN 7 Setting parameters Use the touch screen to set the parameters of the instrument. Click the parameter to be set, and the virtual keyboard will pop up. Set parameters through the keyboard. Input a string When naming a file or folder, you need to enter a string as shown in the following figure. Figure 7.1 Character keyboard71 1. Clear the name input box If the input box does not contain characters, go to the next step. If currently the input box contains characters, click "Delete" key to delete all the characters in sequence or click "Clear" key to remove all characters at a time. 2.
Input uppercase letters To enter an uppercase letter, check whether the letters in the Virtual Keyboard are uppercase. If so, click the virtual keyboard to enter uppercase letters. Or you can click on the "Caps" key to switch to upper state, then click on the virtual keyboard to input uppercase letters. All input will be displayed in the input box. 3. Type lowercase letters Reference on one step, lowercase letters are default. 4. Enter a number or symbol The upper part of the virtual keyboard is digital areas. If you want to input symbols, displayed in the input box. 5. Modify or delete characters that have been entered you can click on the "Shift" key to switch digits into symbols.
All input will be While input, you can modify or delete the entered characters. To delete entered characters, click the "Delete" key or "Clear" key on the virtual keyboard. To modify characters that has been entered, delete the characters and enter the characters again. 6. Input validation After input, click on the "Enter" button. Tablet1000 Quick guide Copyright © Qingdao Hantek Electronics Co., LTD 18