Quick start EN This interface connects USB-compatible storage devices to the instrument. Read the waveform file or status file in the USB disk, or save the current instrument state or edited waveform data to the USB disk, or save the current screen as a picture to the USB disk. 2. Type-C Through this interface, the instrument can be connected to the computer, and the user can connect the upper computer software or send SCPI instructions. This interface is also a charging port, which can charge the machine with the power adapter and USB cable delivered with the accessories. File sharing is also supported. For details about USB Sharing, see section " Settings ". Figure 4.10 Upper panel 1.
Signal source channel The signal source channel interface outputs different types of waveform. For devices that do not support a signal source, the signal source channel outputs 1KHz square wave signals. 2. CH1 ~ CH4 channels 4 analog channels that connects the probe and analogs signal input. Tablet1000 User manua l Copyright © Qingdao Hantek Electronics Co., LTD 18