Quick start EN Figure 4.15 Character keyboard 1. Clear the name input box If the input box does not contain characters, go to the next step. If currently the input or click "Clear" key to remove all characters at a time. 2. Input uppercase letters box contains characters, click "Delete" key to delete all the characters in sequence To enter an uppercase letter, check whether the letters in the Virtual Keyboard are uppercase. If so, click on the virtual keyboard to enter uppercase letters. Or you can input uppercase letters. All input will be displayed in the input box. 3.
Type lowercase letters click on the "Caps" key to switch to upper state, then click on the virtual keyboard to Refer to the previous step. Lowercase letters are default. 4. Enter a number or symbol The upper part of the virtual keyboard is digital areas. If you want to input symbols, you can click on the "Shift" key to switch digits into symbols. All input will be displayed in the input box. 5. Modify or delete characters that have been entered While input, you can modify or delete the entered characters. To delete entered characters, click the "Delete" key or "Clear" key on the virtual keyboard.
To modify characters that has been entered, delete the characters and enter the characters again. 6. Input validation After input, click on the "Enter" button. Input numerical values When modifying the parameters, the numeric keypad is used to input the numerical value as shown in the following figure. Tablet1000 User manua l Copyright © Qingdao Hantek Electronics Co., LTD 22