Руководство по эксплуатации Hantek Tablet1000 — цифровой осциллограф (EN) — страница 78 из 98

Multimeter EN The connection method suggested when measuring different gears. 16.1 Measurement 1. Dc and AC voltage measurement ⚫ Click [ DMM ] on the main interface to enter the multimeter interface. ⚫ Select DC volt (V-), DC millivolt (mV-), AC volt (V ~). ⚫ Insert the black probe into the COM banana jack input terminal, the red probe into the V/Ω/C banana jack input terminal. ⚫ Connect the red and black probes to the measured point. The voltage value of the measured point will be displayed. 2. DC and AC current measurement ⚫ Click [ DMM ] on the main interface to enter the multimeter interface.

⚫ To measure the DC current greater than 200mA, select DC ampere (A-) and AC ampere (A ~), insert the black probe into the COM banana jack input terminal, the red probe into the banana jack input terminal. ⚫ To measure the DC current less than 200mA, select DC milliampere (mA-) and AC milliampere (mA ~), insert the black probe into the COM banana jack input terminal, and the red probe into the mA banana jack input terminal. ⚫ Connect the red and black probes to the measured point. The voltage value of the measured point will be displayed. 3. Resistance measurement ⚫ Click [ DMM ] on the main interface to enter the multimeter interface.

⚫ Select resistance ( Ω ); ⚫ Insert the black probe into the COM banana jack input terminal, the red probe into ⚫ Connect the red and black probes to the measured point. The voltage value of the the V/Ω/C banana jack input terminal. measured point will be displayed. 4. Capacitance measurement ⚫ Click [ DMM ] on the main interface to enter the multimeter interface. ⚫ Select capacitance ( ); ⚫ Insert the black probe into the COM banana jack input terminal, the red probe into the V/Ω/C banana jack input terminal. ⚫ Connect the red and black probes to the measured point. The voltage value of the measured point will be displayed. 5.