Windows Vehicle window locking Anti-pinch function When the vehicle window locking switch While the windows are automatically closing, they will stop closing and auto is pressed, the corresponding vehicle window cannot be controlled by the ve hicle window switch on the rear door. matically lower by a certain distance if foreign objects are detected between the window frame and the window pane. Pressing the vehicle window locking switch again will recover the function of the rear vehicle window switch. Operation A WARNING H NOTICE When there are children in the vehicle, This function is only applicable for the driver's side window.
it is recommended that they should sit in the relatively safe rear seats and the vehicle window locking function should A WARNING be enabled. Do not use any part of your body to test anti-pinch function. Passenger's side window switches Anti-pinch function may not be fully deployed if a foreign object is caught just before the window is fully closed. On the armrest of the passenger's side door, there is a window switch which can be used to open or close the corre sponding window. Thermal protection func tion H NOTICE In the harsh conditions such as low temperature and severe bumps, the glass may trigger anti-pinch function as it rises, and cannot be successfully closed.
At this time, please pull the window switch beyond pressure point to close it. Thermal protection may be triggered to protect the glass lifter motor after re peated operation of the window switch. At this time, the window switch will tem porary failure. The window switch auto matically returns to normal after the lift er motor cools down. Initialization When errors occur in one-push raising or lowering function, you can reset it through the following operations: 1. Change the ignition switch to ON mode. 32