Note If the appliance is placed on its back, ensure that the wall spacer is not fitted. Fitting the wall spacer Fig. 2 A/B If available: Fit wall spacers to obtain the indicated energy rating of the appliance. A reduced wall gap will not restrict the function of the appliance. The energy rating may then increase slightly. Aligning the appliance Place the appliance in the designated location and align. Adjust the height- adjustable feet with a wrench. Change over the door hinges in numerical sequence. Fig. 1 (if required) We recommend that you have the door hinges changed over by our customer service.
You can find out the costs for changing over the door hinges from your appropriate customer service. г= Warning While changing over the door hinges, ensure that the appliance is not connected to the power supply. Pull out the mains plug beforehand. To prevent damaging the back of the appliance, place adequate padding underneath. Carefully place the appliance on its back. The appliance must project 15 mm beyond the furniture on either side to ensure that the doors can be opened by 125°. Changing over the door hinges Installation in cavity en 8