2. Charging Status Indicator: Once the adapter is plugged into the socket and you've confirmed the charging mode, the indicator will light up and remain still, otherwise it remains off. · Please unplug the adapter before conducting the battery tests and make sure the clamps are properly connected to the battery terminals. 3. Bluetooth Connection Status Indicator: If the TB6000Pro is under standalone mode and not paired to any phones, the Bluetooth indicator will keep flashing. Once it is paired, the indicator remains still. 4. Charging Steps Indicator: It shows you exactly which step you are in among the 9 charging steps. 5. Real-time Charging Voltage and Current:
It presents you with the real-time charging current and voltage. The parameter refreshes every 2 seconds . When the following errors occur, it will display the corresponding error code: Er1: Short circuit or reverse polarity Er2: Overtemperature Er3: Charging timeout Er4: Battery is damaged, please switch to 12V Supply mode to attempt to recover the battery. Er5: Wrong mode, please select 12V charging mode. 6. Battery Charging Progress 7. Mode Button: Press the Mode button to toggle among charging modes. After a charging mode is selected, charging will start automatically within 3 seconds. Note: The charger will resume charging using the previous mode when it is powered on again.
How to Download and Connect the TB6000Pro to Your Phone? 10