Installation | System requirements 3 Installation | Installation The TwinCAT 3 Measurement installation package is available as a download from the Beckhoff website. It contains various measurement products, such as Scope View, Scope Server, Bode Plot, Filter Designer, etc. This range of functions can only be activated via licenses. 3.1 System requirements | System requirements The following system requirements must be fulfilled for proper functioning of the TwinCAT 3 Bode Plot. Supported operating systems Windows 10, Windows 11 TwinCAT Minimum is TwinCAT 3 ADS. .NET Framework The .NET Framework 4.7.2 is required. In TwinCAT 4024, TwinCAT 3 Bode Plot is installed together with TwinCAT 3 XAE.
An update of the TwinCAT Bode Plot independent of TwinCAT XAE can be implemented via the TwinCAT Measurement Setup. The Bode Plot is license-free in the base version. Please refer to the product overview page for the feature set of the Base version. In TwinCAT 4026, the Bode Plot is not included in TwinCAT.Standard.XAE; instead, it must be installed via a separate workload, TE1320.BodePlotBase.XAE. 3.2 Installation | Installation Depending on the TwinCAT version and operating system used, this TwinCAT 3 Function can be installed in different ways, which are described in more detail below. Update installation An update installation always uninstalls the previous installation.
Create a backup of your configuration files before the update. TwinCAT 3 Package Manager: Installation (TwinCAT 3.1 Build 4026) If you are using TwinCAT 3.1 Build 4026 (and higher) on the Microsoft Windows operating system, install this function via the TwinCAT Package Manager (TcPkg). Detailed instructions on installing products can be found in the chapter Managing TwinCAT Software in the TwinCAT 3.1 Build 4026 installation instructions . NOTICE Unprepared TwinCAT restart can cause data loss The installation of this function may result in a TwinCAT restart. Make sure that no critical TwinCAT applications are running on the system or shut them down in an orderly manner first.
TwinCAT Package Manager UI Install the following workload via the TcPkg U ser I nterface (UI) to use the product: TE132x | TwinCAT 3 Bode Plot TwinCAT Package Manager CLI You can use the TcPkg Command Line Interface (CLI) to display the available workloads on the system: TE132x 9 Version: 1.3.0