19 - 20 When the colour of the cooking level indicator (A6) corresponds to the degree of cooking you require, open the appliance and remove the food. EN 19 20 4 Comments 21 Close the appliance. The control panel will light up and set itself to ‘choice of program’ mode. Comment: the security system will turn off automatically if no program selection is made. How to cook another batch of food: After finishing your first batch of food: 1. Make sure the appliance is closed with no food inside. 2. Select the appropriate cooking mode/program (this step is necessary even if you decide to pick the same cooking mode than for the previous batch of food). 3. Press the “OK” button:
the appliance starts pre-heating. The pre- heating is symbolized by the cooking level indicator that flashes purple. 4. The pre-heating is complete when an audible beep is heard and the cooking level indicator stops flashing purple. 5. After the pre-heating, the appliance is ready for use. Open the grill and place the food inside the appliance. Important: - Please note that any new batch of food, the pre-heating phase is mandatory. Remember to always have the grill closed and no food inside in order for the pre-heating to effectively function. 21 50