Introduction This manual was written to assist with the general installation of Thermo King ® components onto trucks designed and built for refrigerated applications. The Thermo King Installation Standards and Procedures Guide (TK 56430) provides more detailed information that must be followed to safely and properly complete the entire installation. Due to its complexity, you should not attempt this installation unless you: Are an experienced mechanic. Can safely lift 34 kilos (75 lbs.). In the U.S., EPA 608 certified and trained in the repair and maintenance of transport refrigeration systems. Have a basic understanding of electricity and electrical wiring.
Have the necessary tools and equipment to complete the installation. Have a truck body designed and built to meet the requirements of this installation. Follow all safety precautions outlined in the Thermo King Installation Standards and Procedures Guide (TK 56430). This manual is published for informational purposes only. Thermo King makes no representations warranties express or implied, with respect to the information recommendations and descriptions contained herein. Information provided should not be regarded as all-inclusive or covering all contingencies. If further information is required, Thermo King Corporation Service Department should be consulted.
Thermo King’s warranty shall not apply to any equipment which has been “so installed, maintained, repaired or altered as, in the manufacturer’s judgment, to affect its integrity.” Manufacturer shall have no liability to any person or entity for any personal injury, property damage or any other direct, indirect, special, or consequential damages whatsoever, arising out of the use of this manual or any information, recommendations or descriptions contained herein. The procedures described herein should only be undertaken by suitably qualified personnel. Failure to implement these procedures correctly may cause damage to the Thermo King unit or other property or personal injury.
Revision History Revision A (02/21) Released new manual. Revision B (07/21) Page 45 - Corrected 115V/1PH electrical plug number. Customer Satisfaction Survey Let your voice be heard! Your feedback will help improve our manuals. The survey is accessible through any internet-connected device with a web browser. Scan the Quick Response (QR) code or click or type the web address https://tranetechnologies.iad1.qualtrics.com/jfe/ form/SV_2octfSHoUJxsk6x?Q_CHL=qr&Q_JFE=qdg to complete the survey. ©2020 Trane Technologies TK 56881-18-IM-EN