Installing the Condenser Condenser Installation Important: See Section 4 - Unit Installation Standards and Procedures in the Thermo King Vehicle Powered Truck Installation Standards and Procedures Guide (TK 56430). THESE PROCEDURES MUST BE FOLLOWED! Note: Nose mount and roof top condenser mounting and access hole dimensions can be found at the back of this manual. WARNING Equipment Damage! Seal all the holes inside the electric box which are not used for installation (depending nose mount/roof top). Otherwise water will get into the electric box and damage the components. Figure 1. Condenser Mounting Bolts TK 56881-18-IM-EN 13 1.
Mounting holes when unit is mounted on the Front of the Truck (6) 2. Mounting holes when unit is mounted on the Roof of the Truck (6)