Installing the In-Cab Controller 1. Install the mounting bracket for the controller. Its design allows the mounting bracket to be positioned in various places in the cab interior. Find a location which is accessible and visible from the driver’s seat, and which does not restrict the mobility or visibility of either the driver or the vehicle’s instruments and levers. 2. Depending on the location chosen, the base should be mounted following either Option A or Option B. 3. Mount the base of the mounting bracket in the chosen location. Use screws (C), rubber mat (D) and metal plate (E), which are supplied by Thermo King, as indicated in the drawing. 4.
When placing the controller on the bracket, rest the controller on the arm (F), and slide it to the right until the arm tab is properly fitted to the controller frame. 5. The tilt of the controller’s front face may be altered by loosening screw (G). 6. Connect the data cable to connector (H). 7. To remove the controller from the bracket, press the tab (I) and slide to the left. 1 2 3 Figure 7. In-Cab controller shown 4 5-6 7 RCS1622 20 TK 56881-18-IM-EN