en 29 Menu settings You can adapt the appliance to your individual needs in the menu settings. 1. Hold the e off / j button (12) down for at least 3 seconds. 2. Press the e off / j button (12) repeatedly until the required menu item appears in the display. 3. Select the required setting with the upper rotary knob (14). 4. Confi rm by pressing the start button (10). To leave the menu without making any changes, turn the rotary selector to Exit and press the start button (10). Note: You can use the fi lter indicator to mark the month in which you inserted the fi lter. You can also mark the month in which you will need to replace the fi lter next (at the latest after two months).
You can set the following: Shut off Here you can set the time span after which the appliance automatically switches off following the last drink preparation. A time between 15 minutes and 4 hours can be set. The default time is 1 hour, but this can be shortened to save energy. Note: If the appliance has not been used for a prolonged period (e.g. vacation) the fi lter should be rinsed before the appliance is used again. To do so, dispense a cup of hot water and pour it away. Filter Here you can set whether a water fi lter is being used. If a water fi lter is not being used, turn the setting to No / Old . If a water fi lter is being used, turn the setting to Activate fi lter .
New water fi lters have to be rinsed before use (see “Water fi lter” on page 28). Start Calc‘n‘Clean The service programmes ( Calc‘n‘Clean / descaling / cleaning ) can be selected manually here. Press the start button (10) and run the selected programme (see “Service Programmes” on page 36). Temp. The brewing temperature ( high / middle / low ) can be set here. TES552... | 05/2013 TES55236RU.indb 29 04.06.2013 14:35:45