en 35 5. Rinse the brewing unit (5a) thoroughly under running water. Tips on energy saving ●The fully automatic espresso machine switches off automatically after one hour (factory setting). The default time of one hour can be shortened (see “Menu set- tings” Shut off on page 29). ●Switch off the fully automatic espresso machine when not in use. To do this, press the e off / j (12) button. The appli- ance rinses and switches off. ●If possible, do not interrupt coffee or milk froth dispensing. Cutting the coffee or milk froth dispensing process short results in higher energy consumption and in more residual water collecting in the drip tray.
●Descale the appliance regularly to avoid a build-up of limescale. Limescale residue results in higher energy consumption. 6. Hold the brewing unit sieve under the running water. Important: Do not clean with detergent or other cleaning agents and do not put it in the dishwasher. 7. Wipe out the inside of the appliance thoroughly with a damp cloth and remove any coffee residues. 8. Allow the brewing unit (5a) and the inside of the appliance to dry. 9. Reinsert the brewing unit (5a) fully into the appliance. 10. Slide the red lock (5d) fully to the right and close the door (5b). TES552... | 05/2013 TES55236RU.indb 35 04.06.2013 14:35:49