en 7 Display The display 5 uses symbols to indicate the selection options, coffee strength and per- cup quantity, and uses text to indicate set- tings, ongoing processes and messages. The rotary knob 6 and selection buttons 4 can be used to change settings . The selected setting is highlighted by a frame. j button and settings Use the j button 7 to display information (press briefly) and adjust settings (hold down for at least 3 seconds). Displaying information The following information can be displayed in the Info menu: ● ●when should the next service be completed. ● ●how many drinks have been dispensed since the espresso machine was switched on.
● ●Press the j button 7 briefly and navigate with the and > buttons 4 . Example: The status line 5a shows the name of the type of drink, along with the strength setting 55 and per-cup quantity О . The selection line 5b shows symbols for drink selection. The arrows in the navigation line 5c indicate the direction in which more menu levels can be found. Info Descale after. 200 А Clean after 200 А Change filter in 200 А * Please refer to “Displays” for more detailed information. Info No. of coffees 11 No. of milk mixes 15 Amount hot water 2l Start button Press the start button 8 to begin drink preparation or to start a service programme.
Press the start button 8 again during drink preparation to stop the dispensing process prematurely. * appears only if the filter is activated. Press the j button 7 briefly to return to the drink selection. If no button is pressed for about 10 seconds, the appliance automati- cally switches back to drink selection mode. Adjusting settings See “Menu settings”. TES80.. | 04/2013 TES803_805_807_1RW.indb 7 08.05.2013 14:52:58 ËË Í Espresso 5a 5b 5c  à À Á Å Æ